Call Us: 815.200.1033
Special Offer: Our Premium Oil Change Service for just $29,99
If your car battery has already served its intention and at the moment wants to be replaced, go forward and do so. Buy a fresh battery and exchange the old one. You surely would require a battery for you to go places with your vehicle.
First off, you do acquire the type of battery that the automotive maker who built and designed your vehicle recommends. It is easy to find the correct battery for it is just like purchasing Volvo V40 automotive parts designed for your Volvo. If you do not know what this type of battery is, try to check your car owner’s handbook. Or if not, you can always run to auto specialists like parts dealers and mechanics for additional information. Keep in mind, though, that for purposes of recycling, the previous one must be exchanged with the new one you will buy. So if you would be doing the exchanging yourself, you can simply drop off the old one at a later time, after you have put in the new car battery.
Now it is time to open the hood and locate where your battery is. Once you have discovered the old battery, disconnect the cables from the terminals of the battery. Keep in mind that you should find the negative cables first before you proceed to disconnecting the positive cables. Negative cables are dyed black while the red ones are the positive cables. And when you have correctly done so, remove the casing that holds the battery in position and take the battery out.
Before you set in the new car battery, make sure that the cable terminals are clean. You can use a wire brush and some baking soda with water to clean them off if they are previously dirty or are already corroded. Clean the battery terminal also. If they are already damaged and beyond making use of, now would be the appropriate time to replace them. When everything is already clean, you can now put the new battery inside the frame. After that connect and connect the cables. This instance, connect the positive cables first, and then continue to the negative cables. And when you have done so, you can now test your battery if it has been hooked up properly. If everything has been properly installed, your engine ought to get started easily.
We appreciate any and all feedback about our site; praise, ideas, bug reports you name it!